Auto Aluminum Foil Rewinding Machine Production Line , paper
Kitchen Aluminum Foil Roll Rewinding Machine Production Line for
Household Food Fruit Factory Price
The fourth generation ideal machine mainly used for cutting soft
temper material, such as aluminum foil, Kraft paper and parchment
A. Complete with CPU 224 Control Panel Board from German Siemens.
B. With auto feeding aluminum foil speed control, alignment and
C. Fully auto core loading, gluing, slitting and rewinding of foil
D. Complete with meter cutting length control.
E. Combination of both Western & Asian Technologies on complete
production and control.
F. Built in position for Embossing Roller, so do not need another
embossing machine for embossing foil.
G. High productivity and user-friendly
H. Complete with all safety features
I. Customized build to respective buyer’s requirement
Raw materials aluminum foils thickness
0.009mm to 0.025mm
Max raw materials width
Maximum unwind roll diameter
Raw material mother roll core id
75mm/150mm (core id)
Finished Roll Rewinding Core id
25mm/30mm/35mm(with three core die)
Slitting length finished roll control
3M to 300M
Open-roll middle stroke
Unloading magnetic power brake
Winding magnetic power clutch
Electrical Power & Supply
Weight of machine
Speed reduction motor
Dimension of machine (L x W x H
3600mm x 1400mm x 1910mm
Kitchen foil cutting and wrapping machinery, main include
open-roll, roller, material traction system, auto rotary link foil
system, up pipe system, roll-up system, and ultraviolet
disinfection system. For its reasonable layout, complete equipment
is compact structure and elegant appearance .Every part’s function,
structure features and caution of adjustment are as follows:
This part has coupling alignment and horizontal adjustment
mechanism, drive each hand-wheel can make the material keep to
middle, and the aluminum foil roll parallel to the roller. The
stroke of coupling alignment and horizontal adjustment both are
2). Stretch roller
Rolling up to the traction roller, need to set a roller running and
some stretch motion in the station, in order to eliminate tension
pulsation phenomenon and wrinkling phenomenon when the foil roll
opened. That can make the foil flat when the foil into the running
3) Foil material traction system
This part is the main power part for the foil transporting,
drivered by the variable frequency speed regulation induction
motor. It uses the chain type running in order to running stable
and gapless. Rubber roller use air pressure as the hold-down style.
4). Rotary automatic feeder system
This part use rotary precision squirrel cage structure, roll up,
connect, wind, transverse and coordination automatic. System use
electromagnetic clutch control the tension, the slip torque can be
set arbitrary, PLC controlled automatic, speed up to production
demand. On the operation panel, in the range of the 50m/min can be
displayed and set arbitary.Cutting foil finished by the pressure.
For this part as the core of the equipment, need high processing
and assembling precision. So when producing, only need modify the
right transverse cutter and adjust the distance between the rotary
tables. When the I.D of paper core modified, the rotary table
should be changed by professional engineer.
5). Upper paper core system
This part has the function upping paper core automatic, sizing and
locate paper core right. Paper core feeder adopts the electric
vibration Structure, in order to feed foil successfully at one
time. Two slides as movable type, can adjust the space along the
axially, the space should be based by the two flange space of the
squirrel cage. Sizing mechanism take gravure printing ring offset
model, width of the ring offset is: 30-35 mm, and you can adjust
the space of ring by adjusting the space within the three cots.
Adjusting pressure of the spring of the slid can control the
thickness of the cots.
6). Rolling-up system
Roll-up system has the slop material received part and stainless
steel chain brings material tray part. After material from squirrel
cage, downslide alone the slope, finish the tail material rolling.
When cutter working, by link mechanism, roll down on the receiving
tray exactly. Finally chains convey belt transfer the roll out.
Rolling-up is drived by the servo motor, PLC control its
intermittent motion. Meanwhile drive the synchronous motion’s
rolling-up drives and squirrel cage intermittent motion.
7). Ultraviolet disinfection system
Between spring roller and traction roller, there is an ultraviolet
disinfection system. Disinfection the front and back of aluminum
foil, in order to meet the demand of the food packaging. When
repairing the lamp, just open the front door of the disinfection
box. When operation, must keep the front door closed. There are two
lamps, 20W power of each.
8). when adjusting the breaking cylinder, only need open protective
1. Hight quality machine body.
2. Always automaticlly.
3. No noise.
4. More effcient,less labor.
5. Several color to choose.
1. Q: Are you a manufacturer or trading company?
A: Yes, we are a manufacturer.
2. Q: What certificate do you have?
A: We have ISO ,SGS and CE certificate.
3. Q: How does your factory do regarding quality control?
A: We have a special QC department in charge of products’ quality.
4. Q: How long is the warranty period?
A: All of our products have one year warranty.
5. Q: How much production capacity of your company one year?
A: This depends on your needs.
6. Q: What’s the main market of your company?
A: We have customers all over the world.
7. Q: Where is your factory located?
A: Our factory is located in Zhangjiagang City, Jiangsu Province,
China, about 2 hours to Shanghai by car.
8. Q: Can we visit your machine operating in your factory?
A: We have own workshop, and we are enthusiastically looking
forward to your visit guidance and
9. Q: How can we visit there?
A: We offer transportation service when you arrive in Shanghai or
Jiangsu Province, China.